- Hi-lumen EDISON LEDâs with 120 Lumen/Watt output along with copper PCB with the heat sink. The Wattage of Streetlight at 13.5V: 32W & at 12V: 16W. Lumen output when operating at 32Watts: 3840 Lumens. Lithium Battery size fitted inside cavity: 24Ah
- Package contents â 24V 32W Semi-Integrated Solar Streetlight (Inside Cavity: 10A Solar Charge Controller with inbuilt Dimmer & PIR Motion Sensor along with 24Ah LiFePO4 Battery Pack)
- Fit Streetlight directly on a pole without any battery box or controller box, just put 80W to 120W Solar Panel on Pole & connect two wires from the solar panel directly to two wires coming out from streetlight cavity. Turn On Switch near PIR motion sensor (OFF in Transport Mode) only when a streetlight is mounted on pole & solar panel is connected to a streetlight. Streetlight will turn ON after sunset & turn OFF at sunrise (Dusk to Dawn Feature)
- Application: Security and safety lighting, rural area lighting, Dock lights, Parking lot lighting, Parkway lighting, Walkway lighting, Street lighting, Transit Lighting, Outdoor area lighting, Military and civil security, and so on.
- Working FunctionalityâStreetlight will turn on at 100% Intensity for the first 1hr. After 1hr if motion is not detected for the next 40secâstreetlight will go to 50% Intensityâif motion is detected, instantly it will go to 100% Intensity for the next 40 sec. If a motion is redetected within 40sec, it will start counting 40sec from the last re-detection time&keep intensity 100% for the next 40sec from that instance.Note:100% Intensity through the night will vary as battery voltage will start reducing from its peak voltage.
