- Solar Charge Controller supports battery charging when connected between the battery and the solar panel. On the LCD display, you can see the charging status and switch modes conveniently. In case of lithium battery type user can set /control/limit solar charging current, Battery charging current to extend battery life. Voltage Setting by User for Battery Type, Charge & Discharge Current Setting as per requirement, Temperature Compensation, PV & Load Current Display, Accumulated & Used Energy Display.
- Compatible battery type 12V/24V/36V/48V Lead Acid /Tubular/SMF/VRLA battery, 4S(12.8V) LFP battery and 3S(11.1V) Li-ion(NMC) battery for 12V battery and for 24V multiply with 2. For 36V multiply with 3 and for 48V multiply with 4.
- Protections: Overload protection, short circuit protection, open-circuit protection, and reverse protection, the device will protect your battery and will increase the battery life. Reverse Polarity for all terminals, Short Circuit for battery & load terminals, Overcurrent for load terminal.
- Working Modes: 24 Hours ON, D2D(0H), 1-23 Hours On, Manual.
- Solar Panel: For 12V System Max Panel Wattage: 600W, Max Panel Input Voltage(OCV): 25V / For 24V System Max Panel Wattage: 1200W, Max Panel Input Voltage(OCV): 50V / For 36V System Max Panel Wattage: 1800W, Max Panel Input Voltage: 75 / For 48V System Max Panel Wattage: 2400W, Max Panel Input Voltage(OCV): 100V.
- Max Supported DC Load Up to 600W for 12V / 1200W for 24V/ 1800W for 36V / 2400W for 48V.
Solar charge controller work with 12V and 24V panel, you can set float voltage (Float voltage is maxed battery charge voltage), discharge reconnects (Load on after this voltage), discharge stop (Load OFF on this voltage), and work mode (When you set hours setting then load ON after sunset automatic). - Note:- When connecting the controller to the battery make sure that the battery should be at least 10.7V charged. For Suitable panel type and Suitable configuration please refer to photos.
- Use & give input of 12V/36Cell Panels for 12V Battery, 24V/60cell Panels for 24V Battery, 36V/72Cell Panels for 36V Battery, 24x2V/ 60cell x2 Panels for 48V Battery System Respectively.
- The controller may get damaged if input voltage guidelines are not followed. For all other combinations of solar panels, kindly choose MPPT solar charge controller over PWM solar charge controller.
- Super Intelligent Solar Charge Controller. Supports all battery types such as VRLA, SMF, Gel/AGM, Lead Acid, LifePO4.
- Dusk to Dawn Mode, Programmable Timing Control with Delayed Off, Reverse Light Control Mode.
- Display Parameters: Temperature, Charge Current, Discharge Ah, Charge Ah, Discharge Current. User Can Change These Parameters (as per specifications supplied by battery manufacturer): Float/Recovery/Absorption/Charge Cut Off Voltages & Discharge Cut off Current for Battery.
- Low Voltage Cut off For Battery & Load Recovery Voltage. Display of Error Code in case of Fault for self-diagnosis.
| SPSCC-100 | SPSCC-200 | SPSCC-230 | SPSCC-3048 | SPSCC-3024 | SPSCC-5048 | |
| Type of Batteries | Lead Acid | Lead Acid | Lead Acid | Lead Acid, LFP & Li-ion | Lead Acid, LFP & Li-ion | Lead Acid, LFP & Li-ion |
| Controller Rating/Battery Voltage | 12V/24V | 12V/24V | 12V/24V | 12V/24V/36V/48V | 12V/24V | 12V/24V/36V/48V |
| Max Charging/Load Current | 10A | 20A | 30A | 30A | 30A | 50A |
| USB Rating | 5V 2A 2Ports | 5V 2A 2Ports | 5V 2.5A 2Ports | 2 Ports & 2.5A | 2 Ports & 2.5A | NA |
| Max Open Circuit Voltage of Solar | 25V/50V | 25V/50V | 25V/50V | 25V/50V/75V/100V | 25V/50V | 25V/50V/75V/100V |
| Max Solar Panel Capacity For 12V Battery Bus | 200W | 400W | 600W | 600W | 600W | 1000W |
| Max Solar Panel Capacity in 24V | 400W | 800W | 1200W | 1200W | 1200W | 2000W |
| Max Solar Panel Capacity in 36V | NA | NA | NA | 1800W | NA | 3000W |
| Max Solar Panel Capacity in 48V | NA | NA | NA | 2400W | NA | 4000W |
| Add On Features | Voltage Setting by User for Battery Type | Voltage Setting by User for Battery Type | Voltage Setting by User for Battery Type, Temperature Compensation | Voltage Setting by User for Battery Type, Charge & Discharge Current Setting as per requirement, Temperature Compensation, PV & Load Current Display, Accumulated & Used Energy Display | Voltage Setting by User for Battery Type, Charge & Discharge Current Setting as per requirement, Temperature Compensation, PV & Load Current Display, Accumulated & Used Energy Display | Voltage Setting by User for Battery Type, Charge & Discharge Current Setting as per requirement, Temperature Compensation, PV & Load Current Display, Accumulated & Used Energy Display |